Route all traffic over other router in LAN (For RA without WAN connection)

Modified on Wed, 10 May, 2023 at 12:37 PM

Go into the web interface of the Peplink router and login.
Go to Network tab and go into the Network Settings.
here you need to configure a Static router with Destination Network 0.0.0.0 (All ip traffic) Subnet Mask 0.0.0.0/0 and as Gateway the IP address of a router with internet that is in the LAN of this Peplink router (192.168.50.100 for example)
Click on the blue circle with the question mark and click the option to reveal the Advanced settings for DNS resolvers.
Check the Untagged LAN en set the preferred DNS Server.
Click on Save at the bottom of the Network settings. When the settings are saved click on Apply Changes in the top right.